Classification characteristics and uses of patterned conveyor belts
The patterned conveyor belt is an angle conveyor belt composed of a patterned covering rubber on the working surface and a flat covering rubber on the non-working surface and a belt core.
Classification characteristics and uses of patterned conveyor belts Patterned conveyor belts: Features: Suitable for conveying materials with an inclination of 0 to 40° to prevent materials from sliding down.
Pattern form: herringbone, pit type, U-type, strip pattern, granular pattern, fan-shaped pattern Band width: 300 to 800mm
Pattern height: 5, 10, 15, 20mm Note: The pattern shape can be designed according to user requirements.
Herringbone pattern
Features: There is a "herringbone" pattern on the belt surface that is higher than the belt body. The pattern can be open or closed. Each pattern can be divided into three types: high, medium and low.
Use: Suitable for conveying powdered, granular, small pieces of materials with an inclination of ≤40 degrees, and can also convey bagged materials.
Stripe pattern
Features: There are stripe patterns on the belt surface that are higher than the belt body. The patterns are divided into three types: high, medium and low. Each pattern can be divided into sparse and dense forms according to the arrangement spacing.
Use: Suitable for horizontal conveying of packaging materials with an inclination angle of ≤30 degrees. If it is in the grooved state, it can replace the herringbone pattern.
Granular pattern
Features: There are granular patterns on the belt surface that are higher than the belt body or recessed into the belt body. The pits can also be made into square holes or prisms and cloth patterns.
Use: The convex granular pattern is suitable for conveying soft packaging or materials that require grip (such as cardboard boxes) or non-sliding conveying.
The pit-shaped granular pattern is suitable for conveying granular materials with an inclination angle of ≤45 degrees.
Fan pattern features: There are semi-fan-shaped (or 1/4 circular) patterns on the belt surface. When the tape is grooved, the pattern is combined into a fan-shaped (or semicircular) shape, which belongs to the high pattern category.
Use: Suitable for conveying powder, granules and block materials at a large inclination angle of ≤60 degrees.
