4 types of slippage and treatment of herringbone pattern conveyor belts
4 types of slippage and treatment that are easy to occur in daily life of herringbone pattern conveyor belts
Herringbone pattern conveyor belts are more common in the category of patterned conveyor belts. They are mainly manifested in obvious herringbone patterns. In actual applications, they are mainly used for climbing conveying. The main significance of the patterned conveyor belt is anti-slip, but there are still slippages in daily use. How is this slippage caused? How can we solve it? The following Xiamen mining conveyor belt will provide you with answers.
1. There are many factors that cause the herringbone pattern conveyor belt to slip during actual use. The belt body is too long or too large, which is one of the factors causing the slippage. For this type of slippage, we can do some special positioning treatment when the conveyor belt is matched with the roller. For example: belt body processing-make a guide bar as a guide and positioning function, and add a groove that matches the conveyor belt guide bar. The two cooperate to guide and fix the conveyor belt, so as to achieve the herringbone pattern conveyor belt. There is no left and right slippage and deviation during operation. 2. The conveyor belt is also prone to slipping in a water-containing operating environment. For such problems, we should try to avoid contact between liquids such as water and the belt body. During the conveying process, try to avoid the belt body working directly in an open-air environment to avoid damage to the belt body by natural weather such as rain and exposure. 3. Including herringbone pattern conveyor belts, basically all conveyor belts will become loose at the roller working part after a long time of use, and this situation is the majority of the factors for the conveyor belt to slip. When the roller loosens after a long time of operation, the belt body will be stretched due to tension, resulting in the occurrence of slippage. The solution to this type of slippage mainly requires manual regular inspection and maintenance, maintenance at regular intervals, and timely handling after problems are found, especially the roller position needs to be adjusted to prevent the belt body from loosening. 4. The last reason for slippage is not caused by the use of elements. When the conveyor belt is installed, the staff's mistakes, which cause the belt body or roller to be not installed properly, will also cause slippage. If such a situation occurs, only partial debugging and slight adjustments are required. There are many reasons for the slippage of conveyor belts. The above four situations are common in daily life. I believe that everyone has a certain understanding of the slippage of conveyor belts. Hebei Hengji focuses on the field of conveyor belts and can provide different types of conveyor belts. It can be customized according to relevant requirements and parameters, and can also vulcanize conveyor belts, add guide strips, sidewalls, skirts, etc.
