Convex herringbone conveyor belt
Parameter description: Patterned conveyor belt is an angle conveyor belt composed of a patterned covering rubber on the working surface and a flat covering rubber on the non-working surface and a belt core. Patterned conveyor belt • Features: Suitable for conveying materials with an inclination angle of 0 to 40° to prevent materials from sliding down. Pattern form: herringbone, pit type, U-type, strip pattern, granular pattern, fan-shaped pattern. Bandwidth: 300 to 2000mm. Pattern height: 5, 10, 15, 20mm Note: The pattern shape can be designed according to user requirements. The pattern conveyor belt is composed of a belt body and a pattern part. Due to the different materials transported and the size of the conveyor inclination angle, the shape and height (depth) of the pattern are also different. Commonly used pattern conveyor belt varieties are as follows: Herringbone pattern patterns can be divided into three types: high, medium and low. Features: There is a "human" pattern on the belt surface that is higher than the belt body. The pattern can be open or closed. Each use: It is suitable for conveying powder, granular, small pieces of materials with an inclination angle of ≤40 degrees, and can also convey bagged materials. Strip pattern features: There are strip patterns on the belt surface that are higher than the belt body. The patterns are divided into three types: high, medium and low. Each pattern can be divided into sparse and dense forms according to the arrangement spacing. Use: It is suitable for horizontal conveying of packaging materials with an inclination angle of ≤30 degrees. If it is in the case of grooving, it can replace the herringbone pattern. Granular pattern features: There are granular patterns on the belt surface that are higher than the belt body or recessed into the belt body. The pits can also be made into square holes, prisms and cloth patterns. Use: Convex granular patterns are suitable for conveying soft packaging or materials that require grip (such as cardboard boxes) or non-sliding conveying. The pit-shaped granular pattern is suitable for conveying granular materials with an inclination angle of ≤45 degrees. Fan pattern features: There are semi-fan-shaped (or 1/4 circular) patterns on the belt surface. When the belt is grooved, the pattern is fan-shaped (or semicircular), which belongs to the high pattern category. Application: Suitable for conveying powder, granular and block materials at a large inclination angle of ≤60 degrees. The width of the pattern conveyor belt that our company can supply is ≤2400mm.
The pattern conveyor belt is composed of two parts: the base belt and the pattern. Due to the different materials to be transported and the different conveying inclination angles, the required pattern shape and height are also different. Commonly used pattern conveyor belt varieties include: herringbone pattern conveyor belt, eight-shaped pattern conveyor belt, fishbone pattern conveyor belt, U-shaped pattern conveyor belt, cylindrical pattern conveyor belt, pitted pattern conveyor belt, etc. Or designed according to user requirements, suitable for conveying powder, granular, and block materials with an inclination angle of less than 30 degrees. The upper convex herringbone conveyor belt, the height of the pattern, is designed according to user requirements. Herringbone pattern conveyor belt, figure eight pattern conveyor belt, fishbone pattern conveyor belt, U-shaped pattern conveyor belt, cylindrical pattern conveyor belt, pitting pattern conveyor belt, etc., or designed according to user requirements. Application: Widely used in mining, metallurgy, coal transportation, power plants, cement plants and other large-angle loose material transportation operations.
