Characteristics and classification of nylon conveyor belts
Nylon conveyor belts are a common industrial belt in our daily work and life. Today, Boli will take you to see the overall characteristics of this type of conveyor belt.
Nylon conveyor belts are widely used in mines, coal yards, chemicals, metallurgy, construction, ports and other departments. Nylon conveyor belts are suitable for conveying non-corrosive, thornless, block, granular, powdered materials at room temperature, such as coal, coke, sand, gravel, cement and other bulk (materials) or piece items, and conveying various block, granular, powdered and other loose materials with a bulk density of 6.5~2.5t/m3. It can also be used for conveying bulk items. Compared with ordinary cotton core conveyor belts, nylon conveyor belts have the advantages of high strength, good elasticity, impact resistance, light weight, and good troughing. It can effectively reduce the cost of transportation and achieve high-speed, large-span, and long-distance transportation.
Nylon conveyor belts, the middle interlayer canvas is nylon canvas. This product has the characteristics of thin belt body, high strength, impact resistance, good troughing, strong interlayer adhesion, excellent flexibility and long service life. It is suitable for conveying materials under medium and long distances, high loads and high speed conditions. It is widely used in mines, coal yards, chemicals, metallurgy, construction, ports and other departments. The above is an introduction to the characteristics of nylon conveyor belts.
Nylon conveyor belts are mainly divided into the following types:
1. According to the performance of the covering rubber, it can be divided into cold-resistant type, acid-resistant type, alkali-resistant type, oil-resistant type, wear-resistant type, etc.
2. According to different uses, it can be divided into lifting belts, power belts, and conveyor belts.
3. According to different structures, it can be divided into ordinary laminated type, impact-resistant type with a transverse reinforcement layer, and anti-tear type.
4. Belt core material: NN100, NN150, NN200, NN300, NN400, NN500
5. Belt width: 100mm-3000mm
6. Fabric layer: 2-10 layers
7. Covering rubber: Working surface: 1.5-8mm Non-working surface: 0mm-4.5mm
