Briefly describe the relevant knowledge points of patterned conveyor belts
The patterned conveyor belt is an angle conveyor belt composed of a patterned covering rubber on the working surface and a flat covering rubber on the non-working surface and a belt core.
Features of patterned conveyor belts: Suitable for conveying materials with an inclination angle of 0~40° to prevent materials from sliding down. Patterned conveyor belts are in the form of herringbone, pit-shaped, U-shaped, striped, granular, fan-shaped and other patterns......
Features of herringbone patterned conveyor belts: There is a "herringbone" pattern on the belt that is higher than the belt body. The pattern can be open or closed, and each pattern can be divided into three types: high, medium and low.
Purpose of herringbone patterned conveyor belts: Suitable for conveying small pieces of powdered and granular materials with an angle of ≤40 degrees, and can also convey bagged materials.
Features of striped patterned conveyor belts: There are striped patterns on the belt surface that are higher than the belt body. The patterns are divided into three types: high, medium and low. Each pattern can be divided into sparse and dense forms according to the arrangement spacing.
Uses of striped conveyor belts: Suitable for conveying packaging materials at an angle of ≤30 degrees or horizontally. If the belt is grooved, it can replace the human-shaped pattern.
Features of granular pattern conveyor belts: There are granular patterns on the belt surface that are higher than the belt body or recessed into the belt body. The pits can also be made into square holes, diamonds, and cloth patterns.
Uses of granular pattern conveyor belts: The protruding granular pattern is suitable for conveying soft packaging materials or materials with gripping power, and the pit-shaped granular pattern is suitable for conveying granular materials at an angle of ≤45 degrees.
Features of fan-shaped conveyor belts: There are semi-fan-shaped (or 1/4 circular patterns on the belt surface, and the patterns are closed into a fan or semicircle when the belt is grooved), which belongs to the high pattern category.
Uses of fan-shaped conveyor belts: Suitable for conveying powder, granules and block materials at a large inclination of ≤60 degrees.
