Basic characteristics of steel cord conveyor belt
Steel cord flame retardant conveyor belt has the advantages of high strength, small elongation, large span, good troughing, etc. It is suitable for long-distance and high-power conveyors. It is the main component of the conveyor and usually plays the role of carrying materials in the conveyor. It is often used for large span, high speed and large carrying capacity of single machine to transport block, granular, powdery and other materials. It is suitable for coal mines, mines, docks and other transportation places, and is more adaptable to environmental conditions. The friction coefficient of the belt surface is large, which is suitable for transportation systems with slopes above 16°.
1. Use galvanized open steel wire rope
Galvanized open steel wire rope is selected to meet various special needs. The steel wire rope has high elasticity and low elongation, and can also obtain higher joint efficiency. The galvanized steel wire rope can be tightly bonded with the core rubber to form a protective layer against rust.
2. High strength
Steel cord conveyor belt can meet the application requirements of many customers, and continuously develop higher strength conveyor belts to meet the long-distance conveying system.
3. Reduce tensioning stroke
The maximum elongation of the steel cord conveyor belt under rated tension is 0.25%, which can reduce the cost of the tensioning system in many applications.
4. Longer joint life
Experiments on dynamic joint test machines have proved that the dynamic joint efficiency of the steel cord conveyor belt exceeds the rated strength by 50%. According to the test method of DIN22131-3, the joint can reach the same service life as the belt body.
5. High impact resistance
Our cover rubber and core rubber are more tightly bonded, providing good impact resistance and tear resistance.
6. Lower unit transportation cost
Fewer conveyors and joints, shorter tensioning strokes and reduced conveyor belt inventory, all of which greatly save investment costs. Longer working life of conveyor belts and joints, reduced downtime, and lower unit transportation costs.
