Under what circumstances will the skirt conveyor belt scatter material?
Skirt conveyor belts are a type of conveyor belt that is widely used in modern industrial industries. They can be divided into two types: conveyor belts with skirts and no partitions and conveyor belts with skirts and partitions. They can be used as elevator climbing conveyor belts, can transport scattered objects, and can also classify and transport materials. Don't think that the skirt conveyor belt has a baffle on the skirt, so it is fearless and can prevent materials from sliding. In fact, even the best conveyor belts may occasionally scatter material. So, under what circumstances will the skirt conveyor belt scatter material? Next, I will analyze it for you.
For the phenomenon of material scattering on the group edge conveyor belt, usually, we can divide it into the following reasons:
1. During the operation of the conveyor belt, the height of the two edges changes, one side is high and the other side is low, and the material is scattered from the low side. At this time, we have to adjust the deviation of the conveyor belt.
2. If the conveyor belt does not deviate but still scatters material, we should consider whether the surface of the conveyor belt is damaged and the material falls out from the gap. For conveyor belts that are not seriously damaged, we can perform maintenance and repairs. If they are seriously damaged, then a new conveyor belt needs to be replaced.
3. The partition and skirt of the skirt conveyor belt are low, and the material to be conveyed is higher than the partition and skirt. When the conveyor belt is running at high speed, the material will be scattered due to inertia.
4. When the belt conveyor is overloaded, its guide trough material blocking rubber skirt is damaged. The steel plate at the guide trough is designed to be far away from the belt and the rubber skirt is long, causing the material to rush out of the guide trough.
The above are several situations in which skirt conveyor belts will scatter materials. Abnormal conditions of the conveyor belt are also closely related to the conveying equipment, so more inspections and maintenance work should be done to make the conveyor belt durable.
