Introduction to the difference between patterned conveyor belts
As industrial belts become more and more popular, there are more and more types of industrial belts, and the quality is gradually improving and perfecting. Today we are going to talk about patterned conveyor belts. At present, the design technology of domestic patterned conveyor belts is becoming more and more sophisticated, which is also the driving force for people to persist in continuous innovation in the field of mechanical conveyor belts.
The varieties of patterned conveyor belts are also complex and diverse. Among them, herringbone conveyor belts, strip pattern conveyor belts, granular pattern conveyor belts, and fan-shaped pattern conveyor belts are more commonly used. Of course, these types of patterned conveyor belts also have some differences. Below we introduces the characteristics and uses of these types of patterned conveyor belts:
1. Characteristics of herringbone pattern conveyor belts: There is a "human" pattern on the belt surface that is higher than the belt body. The pattern can be open or closed, and each pattern can be divided into high, medium, and low. It is suitable for conveying powdered, granular, and small pieces of materials with an inclination angle of ≤40 degrees, and can also convey bagged materials.
2. Characteristics of striped conveyor belts: There are striped patterns on the belt surface that are higher than the belt body. The patterns are divided into three types: high, medium and low. Each pattern can be divided into sparse and dense forms according to the arrangement spacing. It is suitable for horizontal conveying of packaging materials with an inclination angle of ≤30 degrees. If it is in the grooved state, it can replace the herringbone pattern.
3. Characteristics of granular and pitted conveyor belts: There are granular patterns on the belt surface that are higher than the belt body or embedded in the belt body. The pits can also be made into square holes or prisms and cloth patterns. In terms of use, the convex granular pattern is suitable for conveying soft packaging or materials that require grip (such as cardboard boxes) or non-sliding conveying. The pit-shaped granular pattern is suitable for conveying granular materials with an inclination angle of ≤45 degrees.
4. Characteristics of fan-shaped conveyor belts: There are semi-fan-shaped (or 1/4 circular) patterns on the belt surface. When the tape is grooved, the pattern is combined into a fan-shaped (or semicircular) shape, which belongs to the high pattern category.
It is suitable for conveying powder, granules and block materials at a large inclination angle of ≤60 degrees. Varieties of patterned conveyor belts: ordinary, oil-resistant, acid-resistant, alkali-resistant, heat-resistant, etc. according to different covering performance.
Forms: fishbone pattern, U-shaped pattern, herringbone pattern, cylindrical pattern, etc.
Bandwidth: 300mm-2200mm Pattern height: 5, 10, 15, 20, 25, 30 (mm).
Pattern spacing: 125, 200, 250, 330, 400, 500 (mm).
Features: Inclination angle 0-45o prevents materials from sliding down and improves conveying capacity.