Introduction to skirt circular conveyor belt
A common sidewall conveyor belt is a high-angle corrugated sidewall conveyor belt. The large-angle corrugated sidewall conveyor belt consists of three parts: a base belt, a sidewall, and a transverse partition. The ribs prevent materials from slipping and falling. In order to make it easier to bypass the roller, the ribs are designed in a corrugated shape; the function of the diaphragm is to support the material. In order to achieve large-angle conveying, a T-type TC type is adopted. The ribs and diaphragms are connected to the base belt by secondary vulcanization, which has high connection strength.
There are two types of conveyor belts with skirts and no partitions, and conveyor belts with skirts and partitions. They can continuously convey various bulk materials at any angle from 0 to 90 degrees. They have large conveying inclination angles, wide range of use, and small floor space. . It has the characteristics of no transfer points, reduced civil construction investment, low maintenance costs, and large conveying capacity. It solves the conveying angle that cannot be achieved by ordinary conveyor belts or pattern conveyor belts. The corrugated edge conveyor belt can be designed into a complete conveying system according to requirements, avoiding intermittent conveying and complex conveying lifting systems. Corrugated edge conveyor belts can transport various bulk materials in horizontal, inclined, vertical and variable-angle directions, from coal, ore, sand to fertilizers and grains.
